A Novel Concept for Developing a Precise and Predictable Post and Core Complex Using the Injectable Resin Technique (Part 2).

Post and core systems have long been used in dentistry for the purposes of replacing missing coronal tooth structure, retaining the core, and providing sufficient retention and resistance form to the final restoration to re-establish original form and function. While Part 1 of this two-part article provided a history of post and core systems and materials and discussed empirical data regarding fiber-reinforced post systems, this second part of the article focuses on an alternative approach for developing a fiber-reinforced post and core system using a monoblock system via the injectable resin technique and a recently developed fiber-optic post. The present article explains the concept of a ferrule effect and demonstrates the novel restorative procedure.

One case of complicated crown root fracture of upper anterior teeth managed by multidisciplinary joint approaches.

Complicated crown root fracture is a serious combined fracture of the enamel, dentin, and cementum in dental trauma. The treatment method is complicated. During the procedure, the condition of pulp, periodontal, and tooth body should be thoroughly evaluated, and a multidisciplinary approach combined with sequential treatment is recommended. This case reported the different treatment and repair processes of one case of two affected teeth after complicated crown root fracture of upper anterior teeth, including regrafting of broken crown after flap surgery at the first visit, direct resin repair to remove broken fragments, and pulp treatment and post-crown repair at the second visit. After 18 months of follow-up, the preservation treatment of the affected teeth with complicated crown root fracture was achieved. Therefore, fragment reattachment and post-crown restoration are feasible treatment options for children with complicated crown root fracture.

A novel surgical treatment approach for the vertical root fracture of posterior teeth: a case report with 24-month review.

BACKGROUND: Up to 25% of the tooth extraction after root canal treatment could be attributed to the vertical root fracture (VRF). The treatment choice for teeth with VRF would mostly be the extraction despite some repairing methods were also reported. The repairing treatment result of VRF would mostly depend on the fixation strength and the bioactivity of the repairing materials, especially for the posterior teeth with high masticating stresses. This case report designed a novel surgical treatment approach for the VRF of posterior teeth. METHODS: a maxillary premolar with buccal-palatal complete VRF was treated with a new dual-layered repairing approach using adhesive resin + iRoot BP Plus bioceramic cement to fill the modified fracture line with retention forms through the intentional replantation. RESULTS: At the 24-month review, the tooth showed desirable periodontal healing and normal function. CONCLUSIONS: This case report indicated that the dual-layered repairing approach might be effective for saving the posterior teeth with VRF. Nevertheless, further clinical trials are needed for its long-term result.

Evaluation of the Mechanical Properties of 3D-Printed Post and Core Systems.

PURPOSE: To evaluate and compare the fracture resistance and elastic modulus of 3D-printed post and core systems and fiber posts and composite cores. MATERIALS AND METHODS: Endodontic treatment was performed on 30 mandibular premolars, and post space preparation was performed. The teeth were then randomly divided into two groups (n = 15 per group): the 3D-printed (3DP) group and the fiber post and composite core (FPC) group. In the FPC group, fiber posts (Cytec Blanco 43.604, Hahnenkratt) were bonded with resin cement (RelyX U200, 3M), and the composite core dimension was standardized with a silicone index. In the 3DP group, the impression of the post space for each specimen was taken with pattern resin (Pattern Resin, GC America), and the coronal core was produced with the same silicone index. The impressions of the posts and cores were scanned, and then the custom post and core structures were fabricated from permanent crown resin material (Permanent Crown Resin, Formlabs) with a 3D printer (Form3B, Formlabs). Specimens were subjected to load tests with a universal testing machine (M500-25AT, Testometric). After fracture occurred, the fracture force and elastic modulus were calculated. The data were analyzed by independent sample t test (α = .05) Results: There was no statistically significant difference between the two groups in terms of peak fracture force (P = .626) and elastic modulus (P = .125), and no catastrophic root fractures were observed in either group. CONCLUSIONS: The fracture resistance of endodontically treated teeth was not significantly influenced by the post material. 3D-printed, custom-made resin posts were as effective as fiber glass posts with regard to fracture resistance.

Impact of Access Cavity Design on Fracture Resistance of Endodontically Treated Maxillary First Premolar: In Vitro.

This study was designed to investigate the impact of access cavity designs on fracture resistance of endodontically treated maxillary first premolars. The study sample consisted of 72 intact maxillary first premolars, randomly divided into six groups (n = 12). A standardized proximal cavity preparation was prepared for all samples using standard bur. Groups I: control group with only standard proximal cavity and no endodontic access, group II: Truss access cavity, group III: Separated access to buccal and palatal canals without removal of dentine in between, group IV: Access to buccal and palatal canals with removal of dentine in between, group V: Traditional access cavity, group VI: Mesio-occlusal-distal cavity (MOD). For groups I and VI, only composite restoration was used to restore the proximal cavity, while for groups II- V, the access was prepared and endodontic treatment was performed on all teeth, then composite restoration was placed. The root canals were instrumented using nickel-titanium files, irrigated with sodium hypochlorite, and filled with AH plus sealer and gutta-percha using warm vertical condensation. All samples were then placed in an acrylic mold and underwent thermal aging for 10,000 cycles between 5 and 55°C. The samples were fixed in a universal testing machine with the long axis of the roots positioned at 20° to a load applied at a crosshead speed of 1 mm/min using a stainless steel semi-spherical indenter (Ø = 3 mm) until fracture occurred to determine the fracture resistance force in Newton. The normality test (Shapiro-Wilk) showed that data are normally distributed. Group II exhibited the highest mean fracture resistance, and group VI was the least likely to resist the fracture. No statistically significant differences between tested groups (p-value = 0.237). The MOD group showed a more unfavorable mode of fracture compared to other groups. No significant difference in fracture resistance between conservative and traditional access cavities. The missing marginal ridges, such as in MOD cavities played an important role in decreasing the fracture resistance of endodontically treated teeth.

Adhesion of tooth fragment after trauma: effect of adhesion strategy and storage in the rescue box.

This study aims to investigate the impact of storage conditions for crown fragments (specifically, whether they were stored within a tooth rescue box or in tap water) on their adhesion to fractured teeth when subjected to two different adhesive systems (namely, total etch and self etch). Sixty maxillary premolars were sectioned to obtain tooth fragments. These fragments were stored briefly (2 hours) and reattached in the following groups: Group 1 (fragments stored in tooth rescue box and reattached with etch and rinse (E&R) technique), Group 2 (fragments stored in tap water and reattached with E&R technique), Group 3 (fragments stored in tooth rescue box and reattached with self-etch (SE) technique), and Group 4 (fragments stored in tap water and reattached SE technique). After reattachment, the bonded tooth fragments underwent thermal cycling (500 cycles, 5-55 °C) and bond strength testing using a universal testing machine. Two-way Analysis of Variance (ANOVA) and Tukey's tests were used for bond strength comparison (p ≤ 0.05). A two-parameter Weibull distribution was conducted to evaluate the reliability of the storage medium and adhesion modality on bond strength. The results showed that measured shear bond values (MPa ± Standard deviation (SD); arranged in descending order) for each group were: Group 2 (Tap water/E&R = 6.5 ± 2.1), Group 1 (Rescue box/E&R = 6.0 ± 2.5), Group 4 (Tap water/E&R = 5.1 ± 2.8), and Group 3 (Rescue box/SE = 3.6 ± 3.2). Significant differences were found only between Groups 2 and 3 (p = 0.002). In conclusion, storing crown fragments in a tooth rescue box did not significantly affect the shear bond strength of the restored tooth. However, fragments reattached using the self-etch technique showed comparable shear bond strength but a higher rate of adhesive failures compared to the E&R technique.

Healing and long-term prognosis of root-fractured permanent teeth: a retrospective longitudinal study.

AIM: The purpose of the present study was to evaluate permanent teeth with post-traumatic transversal root fractures, for their initial healing modality, the effect of candidate predictors and their long-term prognosis. METHODOLOGY: A retrospective longitudinal clinical study was conducted to evaluate records from patients bearing transversal root fractures in permanent teeth in order to radiographically assess short-term healing and non-healing events in the fracture line, their prognostic factors and their relationship with long term outcomes. The inter-fragmentary tissues were classified as healing: hard tissue (HT), connective tissue (CT) or connective tissue and bone (CT + B) and non-healing: interposition of granulation tissue (GT). A competing risk survival analysis was conducted to estimate the hazards of healing and non-healing events in the short-term and the effect of demographic, clinical, and treatment variables was assessed using the subdistribution regression model (Fine & Gray). RESULTS: Radiographic findings showed 61.4% of healing in the short-term being strongly influenced by the presence and type of concomitant injuries to the coronal fragment. Teeth with concomitant crown fractures (sHR 24.38, 95% CI [3.16-188.3], p = 0.0022), luxations with dislocations (sHR 10.58, 95% CI [1.37-81.9], p = 0.0240) and subluxations (HR 9.66, 95% CI [1.14-81.7], p = 0.0370) were more likely to present non-healing of root fractures in the short-term. The healing rate in the long-term was of 75.9%, most of them with interposition of bone and connective tissue. Kappa statistics demonstrated an overall agreement of 67.1% between short and long-term healing patterns, in special HT and CT + Bone modalities. CONCLUSION: Healing at the fracture site was the most frequent outcome, both in the short-term and in the long-term. Short-term healing modality was strongly influenced by the presence and type of concomitant injuries to the crown fragment, being the worst prognosis observed in root-fractured teeth with concomitant crown fractures, followed by concomitant luxations with dislocation. CLINICAL RELEVANCE: Post-traumatic transversal root fractures have a positive prognosis supporting therefore, a more conservative approach for these teeth before considering more radical treatments.

A retrospective cohort study of pulp prognosis in luxated permanent teeth: a competing risk analysis.

AIM: The present retrospective cohort study aimed to evaluate luxated permanent teeth for pulp prognosis and risk factors. METHODOLOGY: Case records and radiographs of 224 patients, involving 427 luxated permanent teeth, referred for treatment at the Dental Trauma Center-School of Dentistry, Universidade Federal de Minas Gerais, (DTC-SD-UFMG) from 2014 to 2022, were assessed for pulp prognosis classified as vitality, necrosis and pulp canal obliteration (PCO). A competing risk survival analysis estimated the hazards of the three outcomes, and the effect of demographic, clinical and treatment variables was tested using a cause specific Cox regression model. RESULTS: Pulp vitality was found in163 teeth (38.2%), pulp necrosis in 120 teeth (28.1%) and 55 teeth (12.9%) developed PCO. Pulp vitality decreased in the presence of concomitant crown fractures (HR 0.38 95% CI [0.2-0.8] p = 0.006). The risk of pulp necrosis (HR 0.62 95% CI [0.4-0.96] p = 0.03) was lower in cases with open apices but increased with concomitant crown fractures (HR 4.0 95% CI [2.6-6.1] p = 0.001) and intrusions (HR 2.3 95% CI [1.2-4.1] p = 0.007). Lateral or extrusive luxations (HR 3.0 95% CI [1.3-6.9] p = 0.001) and open apices (HR 2.4 95% CI [1.2-4.7] p = 0.01) showed higher rates of PCO. CONCLUSION: Type of luxation, the diameter of the apical foramen, and the presence of concomitant crown fractures were main determinants of pulp prognosis after luxation injuries in permanent teeth. CLINICAL RELEVANCE: Pulp prognosis after tooth luxation is dependent on the presence and direction of tooth displacement together with infection control. CLINICAL TRIAL REGISTRATION: Not applicable.

Optimizing fracture resistance of endodontically treated maxillary premolars restored with preheated thermos-viscous composite post-thermocycling, a comparative study. Part I.

PURPOSE: This research aimed to investigate fracture resistance of endodontically treated maxillary premolars restored using preheated thermo-viscous and fiber-reinforced bulk fill resin composite, in vitro. METHODOLOGY: Sixty sound human maxillary premolars were selected and divided randomly into 6 groups of ten teeth each (n = 10). Group 1; is the positive control with sound unprepared teeth (P), Group 2; is the negative control in which Mesio-occluso-distal (MOD) cavities were left unrestored (N), Group 3; includes the teeth restored by incremental packing with conventional nanohybrid composite (ChP), Group 4; includes teeth restored with short fiber reinforced bulk fill composite (EF), Group 5; includes teeth restored with preheated thermo-viscous bulk fill composite (VB), and Group 6; includes teeth restored using packable bulk fill composite (XF) Tested restorative materials were bonded with a universal adhesive in self-etch mode. Teeth were kept in distilled water for 24 h at 37 °C proceeded by thermocycling (5- 55 °C, 1200×). Teeth were then exposed to compressive load till fracture at a crosshead speed of 1 mm/min. One-way ANOVA followed by Tukey post-hoc test was implemented to compare between more than two groups in non-related samples. The significance level was established at α = 0.05 for both tests. RESULTS: Intact teeth significantly recorded the highest fracture resistance values among all groups. A significant difference was recorded among all the tested groups, with the EF recording the highest values, followed by the VB group then the XF group and ChP that recorded the lowest data. Negative control premolars significantly recorded the lowest fracture. CONCLUSIONS: After thermocycling, endodontically treated maxillary premolars restored with pre-heated thermos-viscous composite did not exhibit an increase in fracture resistance. Notably, our findings indicate that short fiber-reinforced composite demonstrated significantly higher fracture resistance compared to other types of composites assessed in this study. This suggests the potential superiority of short fiber-reinforced composite in enhancing the overall structural integrity of endodontically treated teeth subjected to occlusal forces.

Evaluation of mechanical properties of anatomically customized fiber posts using E-glass short fiber-reinforced composite to restore weakened endodontically treated premolars.

OBJECTIVE: This study was conducted to assess the influence of combining different forms of fiber-reinforced composites (FRC) on the mechanical behavior and bond strength of compromised endodontically treated teeth (ETT). MATERIALS AND METHODS: Eighty extracted human premolar teeth were randomly divided into five experimental groups according to the type of intra-radicular restoration and the canal preparation design which was either non-flared (Group 1), flared (Groups 2-5), closed-apex (Groups 1,3,5) or open-apex (Groups 2,4). Standard prefabricated fiber posts were used as intra-radicular restoration for Groups 1-3 while Groups 4-5 were restored with anatomically customized relined fiber posts. After composite core fabrication, all samples were sent for an artificial aging process. Fracture resistance and push-out bond strength tests were then carried out through a universal testing machine followed by mode of failure analysis via a stereomicroscope and scanning electron microscope. RESULTS: Pairwise Log-Rank comparisons revealed that the survival rate of Group 2 and Group 3 was significantly lower than all other groups after artificial aging. The highest fracture resistance value (1796 N) was recorded in Group 5 and was significantly higher than that of the other groups (p < 0.05), while Group 2 exhibited the lowest fracture resistance (758 N), which was significantly lower compared to the other groups. Group 5 and Group 4 demonstrated a significantly higher push-out bond strength, at all root thirds, than Group 3, Group 2, and Group 1 (p < 0.05). The most frequently observed failure mode in the tested groups occurred between the resin cement and radicular dentin. CONCLUSION: The use of short fiber-reinforced composite (SFRC) to reline the prefabricated FRC post has been proven to have superior fracture resistance with favorable failure patterns and increased push-out bond strength values compared to standard prefabricated FRC posts.

Radiographic Assessment of 121 Glass Fiber Post Procedures in 32 Patients Aged 21-60 Years Performed by 6th-Year Dental Students During the 2022-2023 Academic Year at the College of Dentistry, Jazan University, Saudi Arabia.

BACKGROUND The restoration of endodontically treated teeth (ETT) and severely damaged teeth has been a concern of clinicians. Glass Fiber Post (GFPs) combine the strength of carbon fiber posts with the esthetic appearance of glass to resemble natural dentin during dental restoration procedures. This radiographical study assessed the GFP carried out by students enrolled in the Clinical Comprehensive Course at the College of Dentistry, Jazan University. MATERIAL AND METHODS A total of 32 patients treated by 18 6th-year dental students with 121 GFPs were assessed in this cross-sectional radiographic study. The assessment covered tooth type, arch, post-to-root width, length of post in relation to the crown and root lengths, amount of remaining gutta percha (GP), and gap between GP and post. Data were analyzed using SPSS, and associations between variables were determined using the chi-square test. RESULTS Maxillary teeth were the most frequently restored with posts (88.4%) with most being (58.7%) anterior teeth, and 50.4% of posts had widths that were one-third that of the root. The percentage of posts was twice (71.1%) or equal to (26.4%) the crown length, whereas two-thirds of the tested GFPs were >5 mm of the remaining GP. Significant differences were observed in location and position of teeth with post width, post length in relation to crown or root length, and amount of remaining GP, with P values of 0.018, 0.000, and 0.001, respectively. CONCLUSIONS The assessed radiographs revealed that the performance of sixth year students in accomplishment GFP radiographically was satisfactory and within the values recommended in the literature.

Polychromatic Restoration of Anterior Fractured Teeth Using a Custom-made Silicone Matrix.

When restoring anterior teeth using resin composites, the use of silicone guide matrices obtained from diagnostic wax-ups is recommended, as this technique facilitates layering and optimizes working time. This is particularly important in polychromatic layering and when more than one anterior tooth is to be restored with resin composites. However, in cases of fractured anterior teeth, it is often not feasible to perform a previous impression and waxing. In these cases, due to trauma and related psychological aspects, patients usually seek immediate esthetic solutions. Therefore, an interesting restorative approach that can simplify the restorative technique is the creation of a silicone guide matrix obtained from the patient's fractured tooth, without the need for prior waxing. This type of personalized matrix was initially proposed by Bertholdo, Ricci, and Barrote. Thus, the purpose of the present work is to demonstrate a modification of the technique for making this type of custom-made matrix for the restoration of two upper central incisors of a 14-year-old patient who fractured his teeth in a bicycle accident.

Prosthetically driven robot-assisted implant surgery: turning a major failure into a simple case.

This case report presents a challenging case of catastrophic failure of a fixed partial denture involving fracture of the prosthesis as well as supporting implants and teeth. The use of robotics facilitated efficient and successful restoration of the patient's dentition. After extraction of 2 fractured teeth and 1 fractured implant, 2 new implants were placed with haptic guidance from robotics, which allowed for stable osteotomies and high initial implant stability quotients. Due to the patient's tremors and heavy occlusal forces, restoration was delayed to allow the surgical site to heal, and the patient received a provisional partial denture. With subsequent placement of the final restoration, the treatment was fully completed in 4.5 months and required only a single surgical procedure. The use of haptic robotics in this case allowed for accurate planning, spacing, and placement of screw-retained implants with an optimal arch, leading to the best long-term outcome for the patient.

[Application of bioactive ceramics iRoot BP Plus® in pulpotomy for complicated crown fracture of immature permanent anterior teeth in children].

OBJECTIVE: To analyze the clinical and radiographic effectiveness of a calcium silicate-based bioactive ceramic iRoot BP Plus® pulpotomy of immature permanent teeth with complicated crown fracture and to evaluate the factors influencing its long-term success rate. METHODS: The digital medical records of patients under 13 years old who had undergone iRoot BP Plus® pulpotomy in the Department of Oral Emergency or the First Clinical Division, Peking University School and Hospital of Stomatology from March 2017 to September 2022 due to complicated crown fracture of anterior teeth, and had taken at least one post-operation apical radiograph were reviewed. The clinical and radiographic information at the initial examination and follow-up period were obtained, including crown color, mobility, percussion, cold test (partial pulpotomy teeth), dental restoration, fistula, swelling or inflammation of the gingival tissue, the formation of apical foramen, pathologic radiolucency and calcification of pulp chamber or root canal obliteration. Data were tested by Fisher exact test and a multiple comparison. RESULTS: In the study, 64 patients including 37 males (57.8%) and 27 females (42.2%) with a mean age of 9.1 years : ere finally enrolled. The total number of permanent teeth that received pulpotomy was 75, and the average follow-up time was 19.3 months. The success rate was 93.1% with the time interval between dental injury and treatment in 24 h, while the success rate dropped to 88.2% with the time intervals beyond 24 h. The time intervals did not significantly affect the pulp survival rate (P=0.61) after pulpotomy (partial or coronal). The success rate 6 months after pulpotomy was 96. 0%, and one-year success rate was 94. 7%. A total of 23 cases were reviewed for more than 2 years after pulpotomy, and 6 cases failed. The mobility had no significant effect on the success rate (P=0.28). Pulp chamber calcification and pulp canal obli-teration were not observed in all the post-operative radiographs. CONCLUSION: The one year clinical and radiographic success rates obtained in this study indicate that iRoot BP Plus® is an appropriate pulp capping material option for pulpotomy treatment of complicated crown fracture in immature permanent teeth without displacement injuries. This technique has broad promotional value.

Review of Approaches to the Management of Vertical Dental Root Fractures and Tooth Preservation.

A vertical root fracture (VRF) is a complex condition in which the fracture lines can be partial or complete and extend along the long axis of the tooth. Considering the nature of the damage and the low likelihood of a successful outcome, such fractures can be difficult to manage. Their management typically involves complex endodontic or surgical procedures, which can be technically challenging for general dentists. Recent advancements introduce promising techniques, such as intentional replantation, adhesive methodologies, and regenerative procedures, showcasing potential in salvaging teeth affected by VRFs. Nonetheless, the imprecise nature of symptoms necessitates meticulous case evaluation by clinicians. Comprehensive patient counseling regarding diverse treatment options and potential ramifications remains crucial to preserving the affected tooth. Preserving a vertically fractured tooth aids in improving both function and aesthetics while safeguarding the arch's integrity by maintaining the height of the alveolar bone. It is important to note that the success of the treatment procedures depends on the extent and location of the fracture, the condition of the tooth and fragment, and the skill of the dental professional performing the treatment. This review highlights the complexity of VRF management, emphasizing the necessity for precise evaluation, patient education, and the exploration of innovative techniques. It aims to review the treatment of VRFs, ranging from classical to contemporary methods, with a focus on tooth preservation. The establishment of standardized protocols and conduct of further research to ascertain long-term efficacy are imperative in optimizing outcomes and retaining natural dentition in cases of VRFs.

Biomechanical behavior of molars restored with direct and indirect restorations in combination with deep margin elevation.

STATEMENT OF PROBLEM: The existing knowledge is insufficient for comprehending the fatigue survival and fracture resistance of molars that have deep approximal direct and indirect restorations, whether with or without deep margin elevation (DME). PURPOSE: The aim of this laboratory and in silico study is to investigate the fatigue survival, fracture strength, failure pattern and tooth deformation of molars restored with DME in combination with a direct or indirect restoration. MATERIAL AND METHODS: This study utilized 45 extracted sound human molars, divided into three groups (n = 15). Standardized 100% inter-cuspal inlay preparations were performed, extending 2 mm below the CEJ and immediate dentin sealing (IDS) was applied. Group 1 (Co_1) was restored with direct composite; Group 2 (Hyb_2) with a 2 mm DME of direct composite and a glass-ceramic lithium disilicate restoration; Group 3 (Cer_3) a glass-ceramic lithium disilicate restoration. All specimens were exposed to a fatigue process involving thermal-cyclic loading (50N for 1.2 × 106 cycles at 1.7 Hz, between 5 and 55 °C), if teeth survived, they were fractured using a load-to-failure test and failure types were analyzed. Finite element analysis (FEA) was conducted to assess tooth deformation and tensile stress in the restorations. Statistical evaluation of fracture strength was conducted using the Kruskal-Wallis test. Fisher's exact test was utilized to analyze the fracture types and repairability. A statistical significance level of α < 0.05 was set for all analyses. RESULTS: All specimens successfully withstood the fatigue testing procedure, and no statistically significant differences in fracture strength were observed among the three groups (P > 0.05). The Fisher's exact test indicated a significant association between the restorative material and fracture type (F2 = 18.315, df = 2, P = 0.004), but also for repairability (F2 = 13.725, df = 2, P = 0.001). Crown-root fractures were significantly more common in the Cer_3 group compared to the Co_1 group (P = 0.001) and the Co_1 group had significantly more repairable fractures (F2 = 13.197, df = 2, P = 0.001). FEA revealed comparable outcomes of deformation among models and higher maximum tensile stress on models with higher frequency of catastrophic failures. CONCLUSIONS: All tested restoration materials exhibited comparable fatigue survival and fracture strength in this laboratory and in silico study. However, it is important to recognize the potential for more severe and irreparable fractures when opting for deeply luted glass-ceramic inlay restorations in clinical practice. In such cases, it would be prudent to consider the alternative option being a direct composite approach, because of its more forgiving fracture types and repairability. CLINICAL IMPLICATIONS: Molars with deep approximal direct and indirect restorations, whether with or without DME, are comparable in their fatigue survival and fracture resistance to withstand intra-oral forces. Deep direct restorations exhibit more repairable fractures compared to deeply luted glass-ceramics.

[The quality of dental care in children with permanent teeth trauma according to analysis of medical records in an emergency unit of a municipal dental clinic]. / Kachestvo okazaniya neotlozhnoi pomoshchi detyam s travmami postoyannykh zubov po dannym analiza dokumentatsii otdeleniya neotlozhnoi pomoshchi gorodskoi stomatologicheskoi polikliniki.

THE AIM OF THE STUDY: Was to assess the efficacy and timing of emergency dental care in children with permanent teeth trauma according to analysis of medical records in an emergency unit of a municipal dental clinic. MATERIAL AND METHODS: The study involved 320 medical records of pediatric patients admitted to emergency dental care unit of a municipal dental clinic in 2021 because of maxillofacial trauma from which 221 records of children with acute dental trauma were extracted. The quality of documentation of the medical records, rationale for diagnosis and adequacy of emergency dental treatment were analyzed. RESULTS: No records included diagnosis code according to ICD-10. Trauma history was described in the majority of records by in 67% of them no trauma time was stated with proper precision. In 67.6% of permanent teeth trauma cases emergency aid was carried out inadequately. All patients with uncomplicated crown fractures were dismissed with no treatment. In complicated crown fractures needing pulp vitality preservation the pulp was devitalized or just anesthetized. Tooth replantation in avulsion cases was not performed. In 13.5% of records the treatment was not properly described. In 67.6% of records there were no recommendations for follow-ups. CONCLUSION: There is a strong need for the improvement of knowledge of traumatic dental injuries management among Russian pediatric dentists by elaboration and implementation of protocols for dental traumas treatment.

Radiographic Criteria for Differential Diagnosis Between Vertical Root Fracture and Apical Periodontitis in Single-Rooted Endodontically Treated Premolars Using Cone-Beam Computed Tomography.

INTRODUCTION: This study explores the differences between the patterns of bone defects associated with vertical root fracture (VRF) and apical periodontitis (AP) in single-rooted endodontically treated premolars (SRETPs) based on cone-beam computed tomography (CBCT) data. METHODS: Eighty-four SRETPs were extracted and categorized into the VRF and AP groups. On preoperative CBCT images, the location of bone defects according to the root thirds in buccolingual and mesiodistal directions across the study groups were compared. RESULTS: The majority of bone defects in the VRF group were longitudinal and combined, involving more than one root thirds in buccolingual and mesiodistal directions simultaneously. A uniform approach to comparing bone defects using the sites of periradicular area with bone loss as a comparison unit was developed. In the VRF group, bone loss sites in the middle and coronal thirds were detected more often and were located mainly buccolingually compared with the AP group (P < .001). CONCLUSION: Bone defects in the middle or middle and coronal root thirds in the buccolingual direction may be potential radiographic signs useful in differentiating between VRF and AP in SRETPs. The introduction of the uniform approach to assessment of bone loss patterns will give practitioners a single simple tool and improve the quality of endodontic treatment.

Impact of Type 2 Diabetes Mellitus on the Occurrence of Vertical Root Fracture: A Case Control Study.

INTRODUCTION: The aim of this case-control study was to examine the relationship between type 2 diabetes mellitus (DM) and the occurrence of VRFs. The crack extension, dentin sclerosis, and chemical characteristics of root dentin in teeth with VRF from patients with/without DM were also compared. METHODS: One hundred and thirty-two patients diagnosed with VRF in crowned root filled posterior teeth were selected. The study was conducted in 2 parts. In Part-1: The cases were matched with control teeth (1:1) for age (±5 years), sex, tooth type, apical extent of root filling, time period after root filling to a diagnosis of VRF, presence or absence of intracanal post and abutment status. The presence or absence of type 2 DM (HbA1c > 6.5) was recorded. In Part-2: The extracted teeth with VRF from the case control study were used to evaluate the extension of VRF, presence of sclerotic dentin and isthmus using a microscopic analysis; while the levels of pentosidine, collagen cross-linking ratio and mineral-collagen ratio were determined by Fourier-transform infrared spectroscopy. The distribution of DM between cases and controls was analyzed using Pearson Chi-Square test and Odds Ratio estimated. Chemical composition data was analyzed using Mann-Whitney test. The extent of sclerotic dentin was analyzed using Pearson Chi-Square test. RESULTS: When compared to patients without DM, patients with DM had 2.67 (95% CI: 1.6-4.45) folds higher odds for occurrence of VRF. Pentosidine (P = .014), collagen cross-linking ratio(P = .047), mineral-collagen ratio (P = .009) and sclerotic dentin extent (P = .0009) were significantly higher in patients with DM and VRF. CONCLUSIONS: Type 2 DM was more often associated with VRFs in root canal treated teeth with crowns. Root dentin from patients with type 2 DM and VRF had higher levels of pentosidine, collagen cross-linking ratio, mineral to collagen ratio and sclerotic dentin.

7.5- to 11.5-Year Follow-up of the Fracture Removal Treatment for Propagated Crown Fractures.

A definitive method to predictably treat propagated longitudinal fractures remains elusive. A proof-of-concept case report series documenting nonsurgical removal of propagated longitudinal fractures has shown up to 5 years of clinical and radiographic success. This installment of the case report series further documents these teeth with 7.5-year to 11.5-year recall evaluations. Three previously reported cases of fracture removal were followed at 11.5 years (1 case), 9.75 years (1 case), and 7.5 years (1 case) after treatment to determine the long-term clinical and radiographic success of nonsurgical fracture removal. This case report series has demonstrated 10-year success (clinically and radiographically) for the treatment of progressive longitudinal fractures. Propagated fractures can be nonsurgically removed and the iatrogenic defect repaired with long-term success providing a foundation for treatment and further investigation.